| Customization: | Available |
|---|---|
| After-sales Service: | Support |
| Warranty: | 12 Months |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Best chilling system70 tons 250kw Air cooled water chiller juice cooling chiller
As a leading air cooled screw chiller supplier,MGREENBELT provides a complete range of air-cooled screw chiller, with cooling capacity from 20Ton to 150Ton/80KW to 530KW and the chiller temperature control range is +30ºC to -30ºC.
Besides the standard air-cooled screw chiller control temperature of 7ºC to 25ºC, MGREENBELT also has air-cooled glycol screw chiller control temperature below zero from 0ºC to -30ºC.
Water Chiller General Introduction
Outlet water temeprature: +7 C° to 30C°
Power Supply: 3PH-380V-50Hz, or based on user local need.
Refrigerant: R22 / R407c / R134a / R404a .
Chiller Cooling Capacity: 20 ton ~ 150 tons
Semi-hermetic screw type compressor
Air-cooled type condenser
Closed loop shell and tube evaporator
No need to install a cooling tower
MGREENBELT Water Chiller Description
20TR to 150 TR China Direct Manufacturer Industrial Screw Air Cooled Water Chiller for Injection Molding Machine
As a leading air cooled screw chiller supplier, MGREENBELT Chiller provides a complete range of air-cooled screw chiller from MG-CS series, with cooling capacity from 50Ton to 580Ton/130KW to 1950KW and the chiller temperature control range is +30ºC to -30ºC.
Besides the standard air-cooled screw chiller control temperature of 7ºC to 30ºC, TopChiller also has air-cooled glycol screw chiller control temperature below zero from 0ºC to -30ºC
Hanbell / Bitze/Fusheng Compressor
New screw type compressor with 20%-30% higher in efficiency.
Cooling capacity control available at four steps (100%-75%-50%-25%), three steps (100%-66%-33%) or no steps control system.
High efficiency, low noise and vibration, easy to install.
Environmental protection refrigerant R134a, R407c available.
Heat exchanger
Shell and tube evaporator, high efficiency and cleanable(plat type available on request).
Aluminum fin type condenser with adequate heat exchanging surface.
Refrigeration solenoid valve, to protect compressor when stop.
Refrigerant sight glass, to further monitor the refrigerant status in the system, so to check the unit running status.
Microcomputer Control System Or PLC Control System
The intelligent control system of microcomputer is precisely controlled, Simple operation, intelligent start and stop, Precision temperature control within 5 to 45 degrees of arbitrary adjustment, LCD display, all kinds of faults at a glance, Monitor ingends in real time, Multiple protection features, The Chinese and English interface sits to switch, To meet the needs of different users, Easy to operate.
Schneier Electrical Systems
Protection system built-in compressor superload protector, circulating water pump superload, system high and low pressure protector, compressor start electronic time delay, German SIEMENS electronic products, with a sound electrical protection system.
Each air cooled screw chiller designed from MGREENBELT has the following features:
Water temperature range 5ºC to 35ºC.
Bitze semi-hermetic screw compressor.
4 grade capacity control, 25%-50%-75%-100%.
Shell and tube evaporator, high efficiency and cleanable(plat type available on request).
Aluminum fin type condenser with adequate heat exchanging surface.
Refrigeration solenoid valve, to protect compressor when stop.
Refrigerant sight glass, to further monitor the refrigerant status in the system, so to check the unit running status.
Siemens PLC control, overall monitoring of unit running status.
Axial fan motor, with independent motor support bracket.
Multi-protection devices to make sure the chiller and the equipment running safety.
Schneidr electrical components.
Danfos/Emerson thermal components.
Unit Safety Protection
Compressor internal protection
Over current protection
High/low pressure protection
High discharge temperature alarm
Over temperature protection
Flow switch
Phase sequence/phase missing protection
Anti freezing protection
Specification for juice chiller
| Product | Air Cooled Water Chiller | |||
| Model | MG-300CS | |||
| Power supply | 3PHASE, 220V, 60HZ | |||
| Total Input power | kW | 89.7 | ||
| Running current | Amps | 261.5 | ||
| Outlet water temperature range | Min -5 ºC/ Max 30ºC | |||
| Cooling capacity | Kcal/hr | 206400 | ||
| kW | 240 | |||
| Tons | 68.2 | |||
| Refrigerant | Type | R407c | ||
| Control type | Thermostatic expansion valve | |||
| Compressor | Type | Semi-hermetic screw | ||
| Quantity | 1 | |||
| Start method | Y-△ | |||
| Energy control | 25%-50%-75%-100% | |||
| Power | kW | 75 | ||
| Condenser | Type | Screw copper tube covered aluminum plate fins | ||
| Air fan | Cooling air flow(m3/h) | 128000 | ||
| Type | Low noise internal fans | |||
| Power(kW).Qty | 0.9*8 | |||
| Evaporator | Type | Shell and tube | ||
| Water Flow rate(m3/h) | 42.8 | |||
| Inlet/Outlet pipe diameter | 3" | |||
| Dimension | L*W*H(mm) | 4030x1950x2100 | ||
| N.W | kg | 2800 | ||
Images of chillers
MGREENBELT Our Company
Application Industry
1. Plastics: Plastic injection, Blowing, Extrustion , Molding, Thermoforming , vacuum forming, PVC processing, rubber.
2. Pool Cooling : Cold Plunge, Swimming pool, Spa etc.
3. Medical: Blood, PET, CT, MIR, Oncology liner accelerator, Pharmaceutical;
4.Light Industrial : Dry cleaning, printing, Lamianting, Spindle coil cooling;
5.Laboratory: Laboratory, Semiconductor;
6. Heavy Industrial: Anodizing, Biodiesel, Biogas, Die casting, Hydraulc, HAVC, Oil;
7.Food Industrial: Bakery, Beverage, Fish Hatchery, Food process, Hydrocooler, Ice Cream, Yogurt;
8.Farming : Dairy, Poultry;
9. Concrete / Cement : Batch, concrete, cement;
10. Chemical: Brine, Acid, Chemical;
11. Brewery / Winery: Glycol chiller, Brewery, winery, Distillery, Fermentation, Immersion.
Service Team
A. 14 Months warranty and life time technical maintenance offered.
B. All extra parts for the machine can be purchased with agent price from Mgreenbelt
C. 24 Hours working phone call/Email/Skype/MSN/Wechat/Whatsapp/Trade manager online to support.
D. Professional technical team and sales person give you regarding troubleshooting procedures via Internet and Phone any time when needed.
E. Free and Professional Training at our Factory under the relaxed condition
FAQ
Q:How to choose a right chiller model?
A:Please make sure the details as follow:
When you send the inquiry to us, pls kindly send it with below technical information.
1)water chiller type: Air cooled or water cooled
2)Cooling capacity: _____ Kcal/hr or _____KW
3)Refrigerant: R22 or others friendly R410A, R407C
4) Voltages and Frequency : ______V/PH/HZ
Q: How to quote a accurate solution for you?
A: After make sure the cooling capacity,please inform us:
1.What's the power supply need? Phase/Voltage/Frequency.
2.What's the refrigerant need? R22/R407C/R410A/R134A and etc.
If this water chiller not suitable for your working need, we have different chiller series, please choose it as follows.
1. Air Cooled Scroll Chiller : cooling capacity range from 1 ton to 35 tons;
2. Water Cooled Scroll Chiller : cooling capacity range from 1 ton to 40 tons;
3. Air Cooled Screw Chiller : cooling capacity range from 20 tons to 150 tons;
4. Water Cooled Screw Chiller :cooling capacity range from 25 ton to 400 tons;
As a professional industrial chiller manufactuer and solution provider , we can supply kinds of chillers to meet your different cooling requirement, if the chillers above is not workable for you, please feel free send needs to us directly.
MGREENBELT Contact Person: Libra Zhang
){kind=link}