Fully Automatic Air Cooled Water Chillers 30HP 40HP 50HP Blister Packing Machine Chiller Industrial

• Customization: Available
• After-sales Service: 24 Hours Remote After-Sales
• Warranty: 12 Months
• Model NO.: MG-30CT
• Cooling Method: Air-cooled
• Unit Structure: Integral
• Selected Voltage: 380V/50HZ
• Compressor Number: 3
• Noise Level: Ultra Quiet
• Application Fields: Plastic
• Application Machine: Machining Center
• Certification: CE
• Condition: New
• Application: Extrusion Industry
• Compressor: Semi-Hermetic Screw Compressor
• Evaporator Type: Ss Tank with Coil or Shell and Tube
• Condenser: High Efficient Finned Copper Tube
• Refrigerant: R134A/R407c/R410A
• Temperature Rangege: 5-35degrees Celsius
• Transport Package: Plastic Foam, Ply Wooden Case Package.
• Specification: 2720*1120*1800
• Trademark: Mgreenbelt
• Origin: China
• HS Code: 8418699090
• Production Capacity: 100
• Package Size: 272.00cm * 112.00cm * 180.00cm
• Package Gross Weight: 1150.000kg

Product Description

Product Description

Air Cooled Water Chiller-------Scroll Type

 

Air Cooled Water Chiller
 

Air-cooled water chillers adopt an air-cooled heat dissipation design. The built-in fan draws air into the device to dissipate heat from the condenser and lower the system temperature. No additional water cooling system is required, and installation and maintenance are relatively simple.

Air-cooled water chiller is suitable for situations where space is limited or where sufficient cooling water cannot be provided. Since cooling efficiency is affected by ambient temperature and humidity, they are typically used in applications with lower heat loads. Each model is equipped with a range of protective measures, including refrigerant high and low pressure protection, motor overload protection, and voltage phase loss and reversal alarms. These chiller units offer excellent performance and a long service life. They are particularly suitable for industries that require precise control and adjustment of chilled water temperatures, capable of accurately controlling temperatures within the range of 3°C to 50°C.

 

Working Principle
 

When the air-cooled water chiller is working, the refrigerant absorbs the heat from the cooled object in the evaporator and vaporizes. The compressor continuously draws the gas generated in the evaporator and compresses it into high-temperature and high-pressure vapor. The refrigerant vapor is then sent to the condenser to exchange heat with the air. After releasing heat, it condenses into liquid. The liquid refrigerant is decompressed after passing through the expansion valve. Then it enters the evaporator to absorb the heat of the cooled object and vaporizes again. This heat exchange process is repeated until the industrial water is cooled to the required temperature.

Application Scope in the Industry

Air Cooled Water Chiller are suitable for a wide range of industrial applications and can accurately control temperatures from 3°C to 50°C, meeting the needs of various industries such as plastics (injection molding, extrusion), plastic packaging, automotive manufacturing, electronics manufacturing, electroplating, chemicals, ultrasonic cooling, printing, etc.

For example, the role of the chiller in the blister machine:

 

 

1. Mold cooling and temperature control: During the blister molding process, the mold needs to maintain a suitable low temperature to ensure that the heated plastic sheet can be quickly cooled and shaped. The chiller provides circulating cooling water, and by controlling the mold temperature, it helps the plastic to cool quickly after the blister process, thereby improving the molding efficiency and quality.

2. Improve product quality: During the blister process, if the mold temperature is too high, it may cause problems such as rough surface, blistering, and deformation of the plastic product. The chiller can stably control the mold temperature to avoid overheating, ensure that the product surface is smooth and flat, and ensure the dimensional accuracy and appearance consistency of the finished product.

3. Shorten the cooling time: The cooling process is an important part of blister molding. The chiller can effectively accelerate the cooling of plastic products, make the product solidify and form faster, shorten each production cycle, and improve production efficiency. This is especially critical for factories that require mass production.

4. Extend the life of the equipment: In the high-temperature working environment of the blister machine, the mold and other parts of the machine are prone to wear due to overheating, reducing the service life of the equipment. The chiller reduces the operating temperature of the equipment through effective cooling, prevents overheating damage, extends the service life of the blister machine, and reduces the frequency of maintenance and replacement.

Product Details

 

 

Product Parameters

Company Profile

Jinan Mgreenbelt Machinery Co., Ltd., established in 2000, is a supplier of Industrial Chiller, Glycol Chiller, Cold Room, Cold room Panel, and Air compressor etc. We have exported more than 100 countries like USA, Mexico, Canada, Spain, Russia, Singapore, Thailand, Australia etc. Mgreenbelt water chiller has wide variety cooling capacity and controlled water temperature. Both water cooled type and air cooled type chiller can extremely offer precise water temperature for any applications, such as plastic rubber, electroplating chemical, food&drinks, beverage, machinery medical and so on.

 

 

Certifications

 

Exhibition

Packaging & Shipping

PACKAGE

LCL SHIPMENT: Use plastic foam protect ,then ply wooden case package.
FCL: If the equipment enough packagewith 20"or 40" container ,will use plastic foam package and wooden pallet.

SHIPPING TERMS

1. We can arrange the shipping by sea, by air ,by truck and train based on your requirements, but kindly remind the refrigerant gas can't allowed by air ,so you must filling them whenmachine arrive if you choose the air ship.
2. FOB,CNF,CIF,DDU can be accepted
3. Any port of CHINA we can sent ,if you have other goods will packaged in one container ,we would like to arrange that for you.

FAQ

Q1: Are you trading company or manufacturer ?
A1: Our company is an integrated set of industry and trade company

Q2: How long is your delivery time?
A2: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to
quantity.

Q3: What is your terms of payment ?
A3: Payment<=5000USD, 100% in advance. Payment>=5000USD, 50% T/T in advance ,balance before shippment.

Q4: How to choose a suitable machine? And how to get a prompt quotation?

A4: Please let us know the machine usage, we have
professional design team who will make a reasonable scheme. When you send the inquiry to us, please kindly provide the below
technical information:
a) Chiller type: Air cooled or water cooled
b) Cooling capacity: Kcal/hr or KW
c) Refrigerant: R410A or others
d) Voltages and Frequency : V/PH/HZ

Contact me if you need !
Sales manager:Steven Qi